Intended Use; Instructions Before Installation - Dometic Midi Heki B Instructions De Montage

Intended use

5 Intended use
The Midi Heki roof light is suitable for installation in motorhomes or caravans:
• Temple version
– with forced ventilation: Item No. 9104100253
– without forced ventilation: Item No. 9104100254
• Electric version
– with forced ventilation: Item No. 9104100257
– without forced ventilation: Item No. 9104100258
• Geared version
– with forced ventilation: Item No. 9104100255
– without forced ventilation: Item No. 9104100256
The maximum travel speed permitted is 160 km/h, as noise or damage could occur
depending on the vehicle design or installation position. In case of excessive noise,
a spoiler (accessory) can be used.
I
NOTE
You can find the illustrations for your version on the following leaflets:
• Temple version: "Midi Heki B" leaflet
• Electric version: "Midi Heki E" leaflet
• Geared version: "Midi Heki K" leaflet
6

Instructions before installation

➤ Before installation, check the roof thickness of your vehicle. Consult the vehicle
manufacturer if you have any questions.
➤ When choosing the installation location, observe the following:
– Adjoining components (roof rack or attachment and reinforcing parts), cables
and cabinets in the vehicle interior must not get damaged when sawing the
hole.
– Sufficient space needs to be available for installing the inner and outer frames.
– Only fit the roof light on flat and parallel interior and exterior roof areas with a
maximum inclination of 15° to the horizontal.
– You may use an existing roof hole provided the roof light fits into it.
– You can fit the roof light sideways (hinge-side at front in direction of travel) or
lengthways (hinge-side on left or right in direction of travel).
6
Midi Heki roof light
EN