Scope Of Delivery; Accessories; Intended Use; Instructions Before Installation - Dometic S7P Mode D'emploi

S7P
3

Scope of delivery

No. in
Description
fig. 1
1 Window
4

Accessories

Available as accessories (not included in the scope of delivery):
Description
Pleated blind
Installation kit
(Fastening bolts 3.5 x 12 mm, securing clips)
5

Intended use

The S7P wall window is suitable for installing in delivery vans with curved exterior
surfaces (radius of 5000 mm). The wall windows are designed as vent windows.
The S7P window is designed for a wall thickness of 22 – 43 mm.
6

Instructions before installation

➤ Before installation, check the wall thickness of your vehicle. Consult the vehicle
manufacturer if you have any questions.
You need securing clips (not supplied) to suit the thickness of the wall (see
chapter "Preparing the installation" on page 6).
➤ With sheet metal coverings, the wall thickness must be increased to at least
22 mm by adding a suitable mounting frame (e.g. wooden frame).
➤ When choosing the installation location, observe the following:
– Adjoining components (attachment and reinforcing parts), cables and
cabinets in the vehicle interior must not get damaged when sawing the hole.
– Sufficient space needs to be available for installing the inner and outer frames.
– Only install the wall window on curved wall surfaces with a radius of
5000 mm.
EN
Scope of delivery
5