Publicité
Tires / Rims / Spacers
By mounting this auxiliary spring on the front axle, the space between the shock absorber (with the spring
around it) and the tire is reduced. Due to axial displacement of the tire on the rim, the tire needs enough
free space. Depending on tire and rim sizes (ET-measure) it may be necessary to mount spacers.
To determine whether it is necessary to mount spacers, two values must be calculated. Depending on the
combination of these values found in the table, spacers may be necessary.
ET-measure
Mercedes-Benz Sprinter 208-316 / Volkswagen LT 28-35, year of construction '96 - '06 (single rear wheel)
Value 1: (Tire width / 2) - ET-measure + 20
Value 2: (Tire width / 2) + ET-measure
Value 1
Value 2
≤ 67
> 170
> 67
≤ 170
> 67
> 170
≤ 67
≤ 170
Example calculation:
Tyre size: 225 / 70 / 15
Value 1 : (225 / 2) - 75 + 20 = 57,5 mm ->
Value 2 : (225 / 2) + 75 = 187,5 mm ->
Tyre size: 225 / 65 / 16
Value 1 : (225 / 2) - 50 + 20 = 82,5 mm ->
Value 2 : (225 / 2) + 50 = 162,5 mm ->
Mercedes-Benz Sprinter 209-324 / Volkswagen Crafter 28-35, year of construction '06 - ... (single rear
wheel)
Value 1: (Tire width / 2) - ET-measure + 20
Value 2: (Tire width / 2) + ET-measure
8
Conclusion
Mount spacers 1700207605 (for steel rims)
Mount spacers 1700207604 (for alloy rims)
Don't mount spacers
Kit doesn't fit (mount other wheels)
Don't mount spacers
Wheel size: 15" / 6J / ET75
OK
NOT OK
Wheel size: 16" / 6,5J / ET50
NOT OK
OK
Tire width
MOUNT SPACERS!
DON'T MOUNT SPACERS!
V 1.3
Publicité
