Threading The Needle On The Left - Janome FA4 Manuel D'instructions

Table des Matières

Publicité

q
w
t
y
u
i
o
q
(A)
1
2
3
52
e
r
(B)
w
e

• Threading the Needle on the Left

Place the spool of thread on the left side spool pin.
* The points to thread for needle on the left are
marked in orange.
* A convenient threading chart is placed on the
machine body inside the looper cover.
1. Draw the thread through the thread guide on the
left from back to front: A
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown: B
q
Thread guide
2. Pass the thread through the holes on the left of
thread guide plate as illustrated.
w
Thread guide plate
3. Hold the thread at both ends and tug gently to
ensure the thread is correctly inserted between
the tension discs. (If the presser foot lifter is
raised, the thread easily inserts between the
tension discs.)
e
Left needle thread tension dial

Publicité

Table des Matières
loading

Table des Matières