Janome FA4 Manuel D'instructions page 44

10
1 2
a
c
b
42
!0
b
a
3
10. Move the lower looper to its rightmost position
by turning the handwheel, and draw the thread
with a pair of tweezers through the hole on the
lower looper 10 cm (4˝) or more.
* Make sure the needle threads are not tangled on
the lower looper.
!0
Lower looper
a
Needle thread
b
Lower looper thread
NOTE: How to thread woolly nylon/polyester thread.
* The illustration at left shows one of the easiest
ways to pass woolly nylon/polyester thread
through the lower looper.
* Use the same method with the upper looper.
a
Lower looper
b
Ordinary thread
c
Woolly nylon/polyester thread