Table des Matières
Publicité
Presentation
The chips collector is an accessory designed to collect the chips coming from the enngraving. It is connected
directly to the machine spindle with a tube and a depth regulating vacuum nose.
It allows to avoid all projections of chips and it leaves clean the working area.
It can be used in an autonomous way by not connecting it to the machine.
Connected on the "Inputs/Outputs" port (5) of the machine, the chips collector is controlled automatically by
the machine.It starts only to run as soon as an engraving work is launched.
To install the chips collector IS on the old machines IS400, IS6000, IS7000 and
IS8000 the "cylinder attachment - Inputs/Outputs" optional board is neccessary
(connectors (4) and (5)) :
Old IS electronics box of the
IS6000 - IS7000 - IS8000 machines
This card must only be mounted by a qualified Gravograph technician. Do not
disassemble any equipment for repairs or cleaning as this way void your
guarantee.
IS CHIPS COLLECTOR • 9
Old IS400 machine
Publicité
Table des Matières
