Installation
Mounting the suction tube
Switch off the machine before
proceeding with any operation:
unplug the power supply cable from
the mains.
1.
Remove the depth regulating nose which is
mounted on the spindle of the machine
(example : GravoTech M20).
2.
Slide the flexible connector
suction tube
with hose on entry
.
Do not over tighten the flexible
connector
obstruction.
3.
Pass the suction tube
door
to the back of the machine
(example : GravoTech M20).
4.
Install a vacuum nose
tube and on the spinde of the machine
(example : GravoTech M20).
onto the
and screw the connector
of the chips collector
to avoid creating an
through the trap
on the suction
IS CHIPS COLLECTOR • 17
GravoTech M20