Information About Regulations; Conformity Standards; Electrical Security - GRAVOGRAPH IS Serie Guide D'utilisation

Information about regulations

Conformity standards

This hardware was designed and build in conformity with the relevant EC marking and EEC directives :
• "Machine Security" Directive 98/37/EEC (22/06/98).
• "Electromagnetic compatibility" Directive 2004/108/EC
• "Low Voltage" Directive 2006/95/EC
The modification or transformation of this equipment, the adaptation and instal-
lation of accessories not recommended by GRAVOGRAPH, the installation of this
equipment in a manufacturing process, the piloting by a robot, the connection
to an external automaton, modify the characteristics of this material and can
make it not compliant with the European Directives it is subjected.These modifi-
cations voids the responsibility of the manufacturer.
In this case, the person who fits the machine and the equipment is responsible for
the EC compliance of the final work station.

Electrical security

The different fuses of this device comply with the IEC 127-2 norm (International Electric Committee).
The different security levels the input/output answer are indicated for each connector in the chapter «Chips
collector assembly». Two security levels are possible :
- Dangerous voltage (power supply, accessories, plugs ...).
- Very low security voltage.
Machine security
This hardware is in conformity with the norm EN ISO12100-1 and EN ISO12100-2.
Electromagnetic compatibility
This hardware is in conformity with electromagnetic compatibility norms:
• EN 55022 - classe B ; EN 61000-3-2 ; EN 61000-3-3 (emission in residential, commercial, and light industrial
environment)
• EN 61000-6-2 (immunity in industrial environment)
All the cables used with this hardware must be in conformity with the electronic compatibility standards, norm
EN 55022 - class B.
Electrical security
This material is «class 1». The mains plug MUST always be connected to a neutral
socket and comply with the regulations in force in the country of installation. If
you do not have a plug of this type, have one installed by an approved
electrician. Under no circumstances should you depart from this instruction.
The manufacturer bears no responsibility towards any user where alterations have been carried out contrary
to the manufacturer's specifications, notably with respect to electrical/electronic elements.
Any operation, other than those mentioned here, must only be carried out by an
approved Gravograph technician.
Do not take the machine apart to repair or clean it : this will void your guarantee.
This symbol indicates that once this equipment has reached the end of its useful
life, it must not be disposed of with non-sorted municipal waste, in accordance
with the European Directive 2002/96/EC.
The equipment must be disposed of at an appropriate collection point for
processing, sorting, and recycling of Waste Electrical and Electronic Equipment
(DEEE).
The elements which compose Electrical and Electronic Equipment may contain
substances which have harmful effects on the environment or on human health.
By following these instructions, you are helping the environment, contributing to
the preservation of our natural resources, and protecting human health.
IS CHIPS COLLECTOR • 6