GRAVOGRAPH IS Serie Guide D'utilisation page 26

A new message will be displayed on the L.C.D. screen of the machine IS :
This message will be displayed for about 3 seconds.
2. During that time (3 seconds) press
If this screen does not appear after having pressed
wait a few seconds, switch it on again, then start the configuration procedure
from the beginning.
3. Select the AUTOMATE menu with the keys
4. Validate by pressing
5. Select «YES» to activate the Automaton function of the machine IS
6. Validate by pressing
7. Press
The following message is displayed on the L.C.D. screen :
Wait a few seconds.
The following message is displayed on the screen :
<< GRAVOGRAPH >>
VERSION XX.XX
In [ SELF TEST ] Cy
to select
In [ SELF TEST ] Cy
to select
Cy [ AUTOMATE ] In
to select
AUTOMATE : NO
to select
AUTOMATE : YES
to select
Cy [ AUTOMATE ] In
to select
<< GRAVOGRAPH >>
VERSION XX.XX
<READY TO RECEIVE>
IS CHIPS COLLECTOR • 26
, switch the machine IS off,