General Maintenance; Emptying The Chips Collector Bag - GRAVOGRAPH IS Serie Guide D'utilisation

General maintenance

Before any maintenance operation is
carried out on the chips collector, this
must not be running and the chips
collector switch in the position 0.
Emptying the chips collector
bag
Goggles, gloves and mask must be
worn when emptying the chips
collector bag (A8).
(label (A9)).
Empty the chip collector bag when
it is filled to 2/3.
1. Switch on the main stop button (A6) to
position 0 (red light should not be lit).
2. Remove the cover (A1).
3. Lift bag retaining plate (A7) and slide out
the chips collector bag (A8).
4. Empty the chips collector bag (A8).
Chips should be disposed of in
accordance with local laws and
regulations. The company and its
agents disclaim all liability and
responsibility for any harm, damage,
contamination or injury caused by
inappropriate or unlawful disposal.
IS CHIPS COLLECTOR • 35