General Information; Intended Use - Dometic HOT PRODUCTS D21 Manuel D'installation Et D'utilisation

D21 Drop-in Cooktop
Do not use the Cover as a griddle or cooking surface . Doing so could result in property
damage or injury .
The Cover must be closed when the vehicle is in motion .
I
Have the installer or dealer show you where the main gas shut off valve is located so that you will
know how and where to turn off the gas supply when necessary .

2 GENERAL INFORMATION

I
The images used in this document are for reference purposes only . Components and component
locations may vary according to specific product models . Measurements may vary ±0 .38 in . (10
mm) .
Included Parts
#6 x 3/4" Screws
(2) Nylon Washers
Corner Pieces
Recommended Tools
Drill
#2 Drive Screwdriver
Optional Parts*
Metal Cover
Glass Cover
* The glass cover is preinstalled on the SECG model and the metal cover is preinstalled on the BPWM
models . Available as an accessory for all other models .

3 INTENDED USE

This Drop-in Cooktop (hereinafter referred to as "Cooktop") is designed and intended for use inside, or for
temporary use outside, the recreational vehicle (hereinafter referred to as "RV") for which it is supplied . Use
these instructions to ensure correct installation, function, and operation of the Cooktop . While this Cooktop
is approved for outside installation, portable or outdoor installations into an enclosure not made from metal
or wood must be approved by Dometic prior to use . Do not store the Cooktop outdoors . This Cooktop is
not designed for installation adjacent to another Cooktop .
The manufacturer accepts no liability for damage in the following cases:
• Faulty assembly or connection .
• Damage to the product resulting from mechanical influences and excess voltage .
• Alterations to the product without express permission from the manufacturer .
• Use for purposes other than those described in the operating manual .
Dometic Corporation reserves the right to modify appearances and specifications without notice .
EN
Quantity
2
2
4
3/32" Drill Bit
Crescent Wrenches (2)
Reference Number
50236
50255
4