Approved Kombiengines - Stihl FSB-KM Notice D'emploi

English

Approved KombiEngines

KombiEngines
Only use KombiEngines supplied by
STIHL or explicitly approved by STIHL
for use with the KombiTool.
Depending on the cutting attachment
used, always refer to and observe the
chapter on "Approved Combinations of
Cutting Attachment, Deflector, Handle
and Harness".
This KombiTool may be operated only in
combination with the following
KombiEngines:
1)
STIHL KM 55 R, KM 56 R, KM 85 R ,
KM 90 R, KM 94 R, KM 100 R,
1)
KM 110 R
Brushcutters with split drive tube
This KombiTool may also be mounted to
STIHL brushcutters (basic power tools)
with a split drive tube (T models).
Operation of this KombiTool is therefore
also permitted on the following power
tool model:
STIHL FR 130 T
WARNING
Refer to the power tool's instruction
manual for use of the barrier bar.
1)
outside the EU only
FSB-KM 7