1. Sicherheit, Verweise, Symbole
1.1 Sicherheitshinweise
Als Sicherheitshinweise werden folgende Piktogramme verwen-
det:
GEFAHR!
Das Berühren spannungsführender Teile ist
möglich! Strom abschalten!
WARNUNG!
Verletzungsgefahr!
Achtung!
Gefahr für Compact-Module
oder Anschlusskonstruktion!
Achtung!
Compact-Module sauber halten!
Wenn nötig abdecken!
1.2 Kennzeichnung von Verweisen
Auf wiederkehrende oder weiterführende Arbeitsgänge wird wie
folgt verwiesen:
! 7.1
Siehe Abschnitt 7.1
! 7.1.2
Siehe Bild 7.1.2
(Bild 2 im Abschnitt 7.1)
F
Hinweis, Tipp
1.3 Symbole
Schraube
u
Anziehdrehmoment
RDEFI 82 671/2004-03
1. Safety, Cross-References and Symbols
1.1 Safety notes and their symbols
The following symbols are used to identify safety notes:
DANGER!
Risk of coming into contact with power-
conducting parts! Cut off power supply!
WARNING!
Risk of injury!
Caution!
Danger for Compact Modules
or adjacent structures!
Caution!
Keep Compact Modules clean!
Cover if necessary!
1.2 Cross-referencing symbols
The symbols below are used to refer to repeat or follow-on work
operations:
! 7.1
See Section 7.1
! 7.1.2
See Figure 7.1.2
(Figure 2 in Section 7.1)
F
Note, recommendation
1.3 Symbols
Screw
u
Tightening torque
6
Anleitung Compact-Module CKK