Smart Diagnosis (Optional) - LG GL-M292SLLN Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SMART DIAGNOSIS
Smart diagnosis function is...
Use this function when calling the Customer Call Centre and receive precise diagnosis when the
Refrigerator malfunctions or fails. Use it only when advised by the consultant and not otherwise.
How to use the function
First, call LG service center. Smart Diagnosis feature to be used only when instructed to do so
by the LG call center agent.
1. Open all the doors of the refrigerator.SDS can be input even in Test Mode & Error status.
Cold
Coldest
(Mid)
2. Turn knob to Middle notch.
3. Turn knob to Warm notch and keep that status for 2sec.
4. Turn knob to Cold notch within 3sec and keep that status for 2sec.
5. Turn knob to Middle notch within 3sec and keep that status for 2sec.
6. Place the phone near the speaker hole in the top right side door hinge.
Ensure the microphone of the telephone is toward the speaker hole.
Do not take away the telephone while data is being transmitted.
During the data transmission for smart diagnosis, hold the telephone 10cm away from the speaker
hole and avoid any background noises.
CAUTION
The transmission sound may be irritating. Do not take away the telephone until the sound stops
for good diagnosis.
7. When SDS is input, buzzer let you know by ringing 4times.
(Frequency of SDS Buzzer is 2000Hz, 0.2sec Off/ 0.2sec On 4times)
8. After inputting SDS, SDS buzzer will ring.
9. After the completion of data transmission, the consultant will explain the result of smart
diagnosis and advise accordingly.
When the data transmission is completed, the refrigerator will be automatically turned Off and
On a few seconds later.
Be aware!
Difference of the regional call qualities may have influence on the function.
If you use home phone, better communication performance will enable much better service.
Smart diagnosis data transmission may not be successful if the call is made from a mobile
phone with poor network reception.
Cold
Coldest
(Cold)
(Only for Selected Internal Micom Models)
(OPTIONAL)
Cold
Coldest
(Coldest)
15
Cold
Coldest
(Mid)

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Gl-c252slbnGl-c252slbbGl-m293slbiGib-393dl

Table des Matières