Extension Cord - Fein WPO14-15E Mode D'emploi

3 41 01 130 21 0.book Seite 9 Freitag, 18. Dezember 2009 7:47 07
Emission values for sound and vibration (Two-figure – specifications as per ISO 4871)
Sound emission
Measured A-weighted sound power level L
(re 1 pW), in decibels
Measuring uncertainty K
A-weighted emission pressure power level measured at
the workplace L (re 20 μPa), in decibels
pA
Measuring uncertainty K
C-weighted peak sound pressure level measured at the
workplace L , in decibels
pCpeak
Measuring uncertainty K
pCpeak
Vibrations
mean vibrational value for polishing
2
m/s
2
ft/s
mean vibrational value for sanding with sanding sheet
h,DS , in
2
m/s
2
ft/s
Measuring uncertainty K, in
2
m/s
2
ft/s
REMARK: The sum of the measured emission value and respective measuring inaccuracy
represents the upper limit of the values that can occur during measuring.
Wear ear protection!
Measured values determined in accordance with the corresponding product standard.

Extension cord

If the use of an extension cable
WARNING
is required, its length and con-
ductor cross-section must be adequate for the
applicational case, in order to prevent a volt-
age drop in the extension cable, power loss and
overheating of the power tool. Otherwise, the
extension cable and power tool are liable to
electrical danger, and the working efficiency is
impaired.
wA
, in decibels
wA
, in decibels
pA
, in decibels
, in
h,P
Recommended dimensions of extension cords
at an operating voltage of 120 V – single-phase
a. c., with only one power tool WPO14-15E/
WPO14-25E connected:
WPO14-15E
100
2.5
8.2
3.5
11.5
1.5
4.5
Cord Size in A.W.G. Wire Sizes in mm
14 12 2.5
Cord Length in Feet Cord Length in Meters
100 150 30
en
9
WPO14-25E
95 95
3 3
84 84
3 3
100
3 3
3.5
11.5
3.5
11.5
1.5
4.5
2
4.0
60