Fein WPO14-15E Mode D'emploi page 13

3 41 01 130 21 0.book Seite 13 Freitag, 18. Dezember 2009 7:47 07
Assembly instructions.
Before mounting or replacing application tools or accessories, pull the power
WARNING
plug. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Mounting the auxiliary handle
(Figure 2).
Screw the auxiliary handle tightly onto
the left or right side of the power tool,
depending on the working method.
Mounting the gear housing cover
(Figure 3).
Mount the gear housing cover onto
the gear case and tighten with the
2 screws.
Fig. 2
Auxiliary handle
Fig. 3
Screw
Gear housing
cover
en
13
Screw