ohmex WWC 1600 Manuel D'utilisation page 53

WWC 1600
CLEANING AND MAINTENANCE
Do not use the appliance without the filters (17 and 18).
• Position yourself on a waste collector and empty dirt from the container (16).
• Remove the tank (9) as previously explained (see paragraph "preparing the appliance").
• Remove the anti-calc filter (10). (Fig. F11)
• Remove the lid (11) to ventilate the air duct in case it is clogged. (Fig. F11)
• Remove the support (14) complete with the cloth (15) from the brush (12) by pressing
on the specific buttons (P) and raising the appliance. (Fig. F12)
• Remove the microfibre cloth (15) from the support (14) and the brush cloth (13).
(Fig. F12 and F13)
Wash them with water and neutral soap; rinse the abundantly with water.
Wait for them to dry before repositioning.
• Wrap the power cord around the specific hooks (5) and store the appliance in vertical
position. (Fig. F14)
Power cord replacement
• If the electric cord is damaged, refer to a
certified electrician for its repair.
Neither provide for its replacement
nor for its repair on your own.
C.A.T.
EN
45