Display; Record - Avtech AVH312 Mode D'emploi

6.4.6 DISPLAY

CONNECTION FULL SCREEN DURATION
CAMERA DISPLAY COVERT
DETECTION
HDD DISPLAY MODE
ALERT BRIGHTNESS
NETWORK CONTRAST
DISPLAY SATURATION

RECORD

NOTIFY
EXIT
1) FULL SCREEN DURATION
Select the full screen dwell duration time in second (03 / 05 / 10 / 15).
2) DISPLAY COVERT
Select "ON" or "OFF" to display or hide the wording "COV." when covert recording is activated in "CAMERA".
3) HDD DISPLAY MODE
Select "SIZE" to show the remaining hard disk capacity for recording in GB, or "TIME" to show the remaining
recording time.
4) BRIGHTNESS / CONTRAST / SATURATION
Click the current value to manually adjust the brightness/contrast/saturation/ of the screen.
6.4.7 RECORD
Note: Please DO NOT change the date or time of your NVR after the recording function is activated.
Otherwise, the recorded data will be disordered and you will not be able to find the recorded file
to backup by time search. If users change the date or time accidentally when the recording
function is activated, it's recommended to clear all hard disk data, and start recording again.
CONNECTION MANUAL RECORD
CAMERA EVENT RECORD
DETECTION TIMER RECORD
ALERT PRE-ALARM RECORD
NETWORK OVERWRITE
DISPLAY
KEEP DATA LIMIT (DAYS)
RECORD RECORD CONFIG
NOTIFY NVR MODE
EXIT
1) MANUAL RECORD
Set the manual recording function on / off.
2) EVENT RECORD
Set the event recording function on / off.
3) TIMER RECORD
Set the timer recording function on / off.
ADVANCED CONFIG
ADVANCED CONFIG
03
ON
SIZE
128
128
128
OFF
ON
OFF
ON
ON
OFF
SETUP
6CH
32
MAIN MENU