Ip Device Search - Avtech AVH312 Mode D'emploi

4.3 IP Device Search

Note: This function is available only for "SUPERVISOR". To know more details, please refer to "4.4 User
Level Creation" at page 12.
Click (IP Search) to start searching IP camera(s) connected in the same network segment as the NVR (i.e.
10.1.1.xx by default).
You'll see the list of every connected IP camera with its connection status to this NVR and MAC address.
IP PORT
10.1.1.12 88
10.1.1.13 88
10.1.1.14 88
10.1.1.15 88
10.1.1.16 88
10.1.1.17 88
10.1.1.18 88

To fix the camera IP address, or allow the NVR to assign an IP address to your IP camera, select "SETUP", and
select "STATIC IP " or "DHCP" for "NETWORK TYPE".
Click "APPLY" and "EXIT" to save your changes.
NETWORK TYPE
IP
PORT
USER NAME
PASSWORD
NETMASK
GATEWAY
PRIMARY DNS
To connect to another IP camera, select the unused IP camera from the IP search list, and select "CONNECT".
Select the channel you want to display the camera images, and click "SAVE" to start connection.
CONNECT
IP
PORT
CHANNEL
USER NAME
PASSWORD
IP SEARCH
MAC PROTOCOL
00:0e:53:e5:9a:f1 AVTECH
00:0e:53:a6:91:18 AVTECH
00:0e:53:a5:9f:a2 AVTECH
00:0e:53:e1:4e:k5 ONVIF
00:0e:53:s5:3e:h6 ONVIF
00:0e:53:e6:4b:26 ONVIF
00:0e:53:g2:3b:e7 AVTECH
SETUP
DHCP
10.1.1.14
80
admin
*****
255.0.0.0
10.1.1.10
168.95.1.1
APPLY EXIT
10.1.1.14
88
CH5
admin
*****
SAVE CANCEL
STATUS
CONNECTED TO CH1
CONNECTED TO CH2
UNUSED
CONNECTED TO CH3
CONNECTED TO CH4
CONNECTED TO CH5
CONNECTED TO CH6
CONNECT SETUP
11
FREQUENTLY-USED FUNCTIONS
EXIT