Camera - Avtech AVH312 Mode D'emploi

Then, click "SETUP" to enter the access information of the camera:
USER NAME
PASSWORD
CACHE TIME (MSEC)
MODEL
GET TYPE
PROFILE
TYPE
IMAGE SIZE
QUALITY
I.P.S.
AUDIO
Step1: Enter the user name and password to access the IP camera.
Step2: Click "GET TYPE" to detect and make sure the access information you're intended to connect is correct.
Step3: Select the image size, image quality, and I.P.S.
Note: The options selectable for "IMAGE SIZE" and "I.P.S." depends on the camera you're intended to
connect.
Step4: (Optional) For the camera with audio recording, select "ON" or "OFF".

6.4.2 CAMERA

CONNECTION CH1
CAMERA BRIGHTNESS
DETECTION
CONTRAST
ALERT
SATURATION
NETWORK HUE
DISPLAY COV.
RECORD REC
NOTIFY REC AUDIO
CHANNEL TITLE
PORT FORWARD
PORT FORWARD ENABLE
EXIT
1) BRIGHTNESS / CONTRAST / SATURATION / HUE
Click the current value to manually adjust the brightness/contrast/saturation/hue of each channel here.
2) COV.
Select if you want to mask the selected channel under recording (ON / OFF). When this function is activated,
the wording "COV." will be shown on the channel screen.
Note: To hide the wording "COV." when this function is on, go to "DISPLAY", and set "DISPLAY COVERT"
to "OFF". For details, please refer to "6.4.6 DISPLAY" at page 32.
3) REC
Select if you want to enable recording for the selected channel (ON / OFF).
Note: When this function is disabled, no manual, event or timer recording will be activated even if any
of these three record functions is set to "ON".
CONFIG-CH1
admin
**********
AVTECH
IP CAMERA
PROFILE-3
H264
720 X 480
30
ON
EXIT
ADVANCED CONFIG
CH2 CH3 CH4 CH5 CH6
128
128
128
128
OFF
ON
ON
EDIT
81
ON
28
MAIN MENU