Dantherm CDP 75 Instructions De Service page 35

Mounting and installation instructions,
Connection of The condenser is normally activated by a temperature controlled pool water pump,
water-cooled which starts up automatically above a specified room temperature and pumps pool wa-
condenser ter through the condenser.
The inflow is connected with the connector marked "IN" and the outflow with the con-
nector marked "OUT".
Connection of Power is connected to the unit in accordance with the name plate. Please refer to the
power supply wiring diagrams on page 120.
Important! All electrical connections must be made in accordance with local power sup-
ply company regulations!
Water quality All electrical connections must be made in accordance with local power supply company
regulations.
With addition of The following guidance values are applicable to swimming pools with the addition of
chemicals chemicals:
Free chlorine content
Combined chlorine content
pH
Total alkalinity
Calcium hardness
Total dissolved solids
Sulphates
Self-production of The following guidance values are applicable to swimming pools with self-production of
chlorine chlorine:
Salt (NaCl)
Total dissolved solids
pH
Total alkalinity
Calcium hardness
Sulphates
Langelier It is advisable to use the Langelier Saturation index to ensure that the combination of
Saturation index the different water parameters is acceptable.
Contact Dantherm Air Handling A/S if necessary.
33
continued
Chemicals
Chemicals
ppm
1,0-2,0
Max. 1/3 of free chlorine content
7,2-7,6
80-150
250-450
< 2000
< 360
ppm
2700-3400
< 5500
7,2-7,6
80-150
250-450
< 360