Safety Notes; Introduction; Features; Product Description - Chauvet Obey 40 Mode D'emploi

Safety Notes

2. Introduction

Features

Product
Description
Obey™ 40 User Manual Rev. 5 ML
Please read these instructions carefully. It includes important
information about the installation, usage, and maintenance
of this product.
•
Please keep this User Manual for future consultation. If you sell the unit to
another user, be sure that they also receive this manual.
•
Always make sure that you are connecting the product to the proper voltage,
and that the line voltage you are connecting to is not higher than that stated on
the sticker or rear panel of the fixture.
•
This product is intended for indoor use only! To prevent risk of fire or shock, do
not expose fixture to rain or moisture.
•
Make sure there are no flammable materials close to the unit while operating.
•
The unit must be installed in a location with adequate ventilation, at least 20" (50
cm) from adjacent surfaces. Be sure that no ventilation slots are blocked.
•
Always disconnect from power source before servicing or replacing fuse and be
sure to replace with same fuse source.
•
Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at
temperatures higher than this.
•
In the event of a serious operating problem, stop using the unit immediately.
Never try to repair the unit by yourself. Repairs carried out by unskilled people
can lead to damage or malfunction. Please contact the nearest authorized
technical assistance center.
•
Never connect the device to a dimmer pack.
•
Make sure the power cord is never crimped or damaged.
•
Never disconnect the power cord by pulling on the cord.
•
Avoid direct eye exposure to the light source while it is on.
•
Universal DMX-512 controller
•
Controls up to 12 intelligent lights with up to 16 channels each
•
30 banks of 8 scenes, 240 scenes max
•
192 DMX channels of control
•
6 sets of chases containing 240 scenes
•
Reversible sliders
•
Re-assignable channels
•
Sequential linking of chases
•
Fog & strobe control buttons
•
Grab any fixture on the fly
•
Beat activation, tap-sync and auto run
•
DMX polarity selector
•
3-space (3U) rack mount
•
MIDI compatible
The Obey™40 is a universal intelligent lighting controller. It allows the control of 12
products composed of 16 channels each and up to 240 programmable scenes. Six
chases can contain up to 240 steps composed of the saved scenes and in any order.
Programs can be triggered by music, MIDI, automatically, or manually. Channel
assignments can be reprogrammed for ease of controlling different fixtures. On the
surface you will find various programming tools such as 8 universal channel sliders,
quick access scanner and scene buttons, and an LED display indicator for easier
navigation of controls and menu functions.
Page 7 of 44