Chase Modifications; Adding A Step To A Chase; Delete A Scene/Step In A Chase; Copy A Bank Into A Chase - Chauvet Obey 40 Mode D'emploi

Chase Modifications

Adding a Step to a
Chase
Delete a Scene/Step in a
Chase
Copy a Bank into a
Chase

5. Programming Modifications

Delete One Scene

Delete All Scenes

Delete a Chase

Delete All Chases

Delete a Bank of
Scenes
Obey™ 40 User Manual Rev. 5 ML
This function will add a step after any step within a chase.
1. Enter program mode.
2. Activate the chase.
3. Using <BANK UP/DOWN>, scroll through the banks until you arrive at the bank that
contains the new scene.
4. Press <TAPSYNC/DISPLAY>. The display will change to step display mode.
5. Using <BANK UP/DOWN>, scroll to the step that will appear before the new step.
6. Press <MIDI/ADD>. The current step on the display will increase by one.
7. Press the new scene: <SCENE 1~8>.
8. Press <MIDI/ADD>. All LEDs on the controller will flash.
1. Enter program mode.
2. Activate the chase.
3. Press <TAPSYNC/DISPLAY>. The display will change to step display mode.
4. Using <BANK UP/DOWN>, scroll to the step that you want to delete.
5. Press <AUTO/DEL>.
6. All LEDs on the controller will flash.
This function copies an entire bank after any existing steps in a chase.
1. Enter program mode.
2. Activate the desired chase.
3. Using <BANK UP/DOWN>, scroll through the banks until you arrive at the bank that you
want to copy into the chase.
4. Press <MUSIC/BANK COPY> and <MIDI/ADD> simultaneously.
5. All LEDs on the controller will flash.
Use this function to delete one of the scenes in the controller. Repeat this process for
each scene that you need to delete.
1. Enter program mode.
2. Use <BANK UP/DOWN> to navigate program banks.
3. Press and hold the <AUTO/DEL> button while pressing the SCENE you want to delete.
Use this function to delete all of the scenes in the controller.
1. Turn off the unit.
2. Press and hold <BANK DOWN> and <PROGRAM>.
3. Turn on power to the unit (while still holding <BANK DOWN> and <PROGRAM>).
4. When all LEDs blink, the function is successfully completed.
1. Enter program mode.
2. Activate the chase to be deleted: <CHASE 1~6>.
3. Press <AUTO/DEL> and <CHASE 1~6> simultaneously.
4. When all LEDs blink, the function is successfully completed.
1. Enter program mode.
2. Press <AUTO/DEL> and <BANK DOWN> simultaneously.
3. While still holding the buttons down, turn the controller OFF.
1. Enter program mode.
2. Activate the BANK that you want to delete.
3. Press <AUTO/DEL> and the <MUSIC/BANK COPY> simultaneously.
4. When all LEDs blink, the function is successfully completed.
Page 13 of 44