Subwoofer - Pioneer HTP-SB300 Mode D'emploi

03 Controls and displays
5 Dolby Digital indicators
2D
Lights when a Dolby Digital encoded signal
is detected.
+
2D
Lights when a source with Dolby Digital
Plus encoded audio signals is detected.
2HD
Lights when a source with Dolby TrueHD
encoded audio signals is detected.
2PLll
Lights to indicate 2 Pro Logic II decoding
(see Listening in surround sound on
page 21 for more on this).
6 ADV.S.
Lights when one of the Advanced Surround
modes has been selected (see Using the
Advanced surround effects on page 21 for more
on this).
7 SIGNAL SELECT indicators
DIGITAL
Lights when a digital audio signal is
selected.
Blinks when a digital audio signal is not
selected.
HDMI
Lights when an HDMI signal is selected.
Blinks when an HDMI signal is not
selected.
8 Dimmer indicator
Lights when DIMMER is set to off.
9 DIR.
Lights when the DIRECT or PURE DIRECT
mode is switched on (page 22).
16
Downloaded From TheatreSystem-Manual.com Manuals
En
All manuals and user guides at all-guides.com

Subwoofer

1
1 Wireless indicator
Standby mode: Lights red
During subwoofer operation: Lights green