Klarstein DELICATESSA 90 SLIM Mode D'emploi page 31

Adjusting the Bracket Position
• The appliance should be placed on a stable, smooth surface (use the packaging).
Do not apply force onto the controls protruding from the hob.
• Fix the hob on the work surface by screwing 4 brackets on the bottom case of the
hob (see picture) after installation.
• Adjust the brackets to the thickness of the work surface.
Connecting the Hob to the Mains Power Supply
WARNING
Risk of injury! Disconnect the appliance from the power supply.
Installation must be carried out by qualifi ed personnel who know the
current safety and installation regulations.
• The manufacturer declines all liability for injury to persons or animals and for
damage to property resulting from failure to observe the regulations provided in this
chapter.
• The power cable must be long enough to allow the hob to be removed from the
worktop.
EN
31