Important Safety Instructions - Clarke Summit 9 Manuel D'utilisation

EN English

IMPORTANT SAFETY INSTRUCTIONS

THIS VACUUM CLEANER IS DESIGNED FOR COMMERCIAL USE.
ACCIDENTS DUE TO MISUSE CAN ONLY BE PREVENTED BY THOSE USING THIS MACHINE.
DANGER:
WARNING:
CAUTION:
WARNING:
1. Do not leave machine when plugged in. Unplug from outlet when not in use and
2. To reduce the risk of electric shock use indoors only.
3. Do not allow to be used as a toy. Close attention is necessary when used by or
near children.
4. Use only as described in the manual. Use only manufacturer's recommended
attachments.
5. Do not use with damaged cord or plug. If machine is not working as it should, has
been dropped, damaged, left outdoors, or dropped into water, return it to a service
center.
6. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord
around sharp edges or corners. Do not run machine over cord. Keep cord away
from heated surfaces.
7. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
8. Do not handle plug or machine with wet hands.
9. Do not put any object into openings. Do not use with any opening blocked; keep
free of dust, lint, hair and anything that may reduce air flow.
10. Keep hair, loose clothing, fingers, and all parts of body away from openings and
11. The following materials must not be picked up with the machine: Hot materials
(glowing cigarettes, hot ashes, etc.); flammable, explosive or aggressive fluids (e.g.
gasoline, solvents, acids, alkalines, etc.); flammable, explosive dusts (e.g.
magnesium or aluminum dust, etc.).
12. Do not use without dust bag and/or filters in place. Use the machine only with an
undamaged filter element.
13. Turn off all controls before unplugging.
14. Use extra care when cleaning on stairs.
15. Connect to properly grounded outlet. See "Grounding Instructions".
Clarke ® Operator's Manual - Summit 9, 13, 20 & 20D
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Failure to read and observe all DANGER statements could result in severe
bodily injury or death. Read and observe all DANGER statements found in
your Operator's Manual and on your machine.
Failure to read and observe all WARNING statements could result in injury
to you or to other personnel; property damage could occur as well. Read
and observe all WARNING statements found in your Operator's Manual
and on your machine.
Failure to read and observe all CAUTION statements could result in
damage to the machine or to other property. Read and observe all
CAUTION statements found in your Operator's Manual and on your
machine.
To reduce the risk of fire, electric shock, or injury:
before servicing.
moving parts.
SAVE THESE INSTRUCTIONS
Page - 5