Alarms; Detailed Information; Scheduling - Komfovent C4.1 Manuel D'installation Et D'utilisation

EN

2.4.1.1. Alarms

This menu displays the notification of existing faults. After failure elimination (see
chapter 2.6), messages are deleted by selecting "Delete". By clicking on „History"
can be viewed up to 50 registered alarms.

2.4.1.2. Detailed information

All temperature sensor readings, functioning of separate air handling unit elements
and other detailed information is available in this menu.

2.4.2. Scheduling

Menu for planning of the air handling unit operation
according to the weekly program.
Three events can be set up for every week day.
One of three modes can be assigned to each event.
Every event has a timing, when the selected mode
should be active. The timing is set by tapping "Start"
and "Stop". When the mode "Standby" is selected, the
fans are stopped and the unit is inactive until the next
event.
Example:
Monday:
07:30 – 11:00 Away mode is active
11:30 – 16:00 Home mode is active
16:00 – 17:00 Boost mode is active
The rest of the day the unit operates in Standby mode.
Note: Every event start and end time is set from 0:00 to 24:00 h. The events should be set consistently from
the first one at the top of the window.
20
Scheduling
Enable
Monday
Tuesday
Wednesday
Thursday
Friday
1 / 2
UAB AMALVA we reserve the right to make changes without prior notice
Alarms
13B
Heater off
03A
Rotor stopping
Ištrinti Istorija
Detailed information
Supply air temperature
21,9 °C
Water temperature
25,3 °C
Supply fan
60 %
Exhaust fan
70 %
Heat exchanger
100 %
1 / 2
Monday
Starting
16:00
Stopping
20:00
Starting
16:00
Stopping
20:00
Starting
16:00
Stopping
20:00
C4.1-16-01-v1