Electrode Arms - Enraf Nonius Curapuls 970 Mode D'emploi

• Approvals stickers
In this place, safety stickers can be affixed.
• Hook for mains cable
For hanging up the mains cable when the
apparatus is not in use.
If required by the local high-frequency interference
regulations, the apparatus can be provided with a
shielded mains cable and an extra interference
filter.
All manuals and user guides at all-guides.com
The metal fixation plate at the broad end of the elec-
trode arm(s) is to be connected to the back of the
Curapuls by means of the supplied hollow-head screw
wrench. You can connect the arm with the knobs
either towards the outside, or towards the unit.
The fixation knobs can be adjusted by hand. We
advise you to adjust so tight that the arm can still be
adjusted, without having to untighten the knobs.
In the top and bottom of the broad side of the elec-
trode arm are holes in which you can click the (sup-
plied) cable guides. If desired, you can also apply
the blind plugs.
Should the purple-ish shell be removed from the small
end of the arm, replace it and fix it by means of the
fixation knob at the small end of the arm, before
mounting an applicator. You cannot mount an appli-
cator, when the purple-ish shell is not in its place.

ELECTRODE ARMS

19