VOLTCRAFT BS-2000HD Mode D'emploi page 25

Item Description
"Length Measure"
Navigate to "Length Measure" in the settings menu then press OK.
The measured length will be shown on the display.
• The length automatically increases as the camera moves into the area for inspection.
• The length can be manually reset to zero at any time.
• The length automatically resets to zero when the product is restarted.
"Auto Power Off"
Navigate to "Auto Power Off" in the settings menu then press OK.
"Display"
• Navigate to "Display" in the settings menu then press OK.
• Adjust various display settings such as brightness, contrast, and sharpness.
"Language"
Navigate to "Language" in the settings menu then press OK.
Select an interface language.
"Date Time Setup"
Navigate to "Date Time Setup" in the settings menu then press OK.
"Video Output"
View the camera image on an external display:
1. Connect the included cable to the Mini HDMI video output and a suitable display.
v
2. Navigate to "Video Output" in the settings menu then press OK.
25