Swing Operation; Sleep Operation; Timer Operation - Danby DAC6010E Guide D'utilisation Et Soins De Propriètaire

Operating Instructions
USING THE REMOTE
CONTROLLER
BUTTONS
All manuals and user guides at all-guides.com
ON/OFF
TEMP
UP
SWING
FAN
ON/OFF
TEMP
S
UP
ENERGY
SAVER
FAN
CLEAN
AIR
ON/OFF
TEMP
S
UP
ENERGY
SAVER
FAN
CLEAN
AIR
12

SWING OPERATION

Use the SWING button to adjust the
Left/Right airflow direction.
MODE
1
1) Press this button while the unit is
operational, the vertical louvers
automatically swing right and left
TEMP
DOWN
sweeping the cold/hot air alternately to
obtain comfortable cooling/heating.
TIMER
2) Press the SWING button again to stop
the swing operation.
SLEEP

SLEEP OPERATION

• In this mode, the selected temperature
will increase(in cooling mode) / decrease
(in heating mode) by 2°F 30 minutes after
MODE
the mode is selected.
• The temperature will then increase by
TEMP another 2°F after an additional 30
DOWN
minutes.
• This new temperature will be maintained
TIMER
for 7 hours before it returns to the
1 originally selected temperature. This ends
the Sleep mode and the unit will continue
SLEEP
to operate as originally programmed.
• The Sleep mode program can be
cancelled at any time during operation
by again pressing the Sleep button.

TIMER OPERATION

press the TIMER button can set the Auto-
start and Auto-stop time of the unit.
NOTE:
• To set Auto-start time, the unit must be in
the OFF position.
• To set Auto-stop time, the unit must be in
the ON postion.
MODE
To set the Auto-start time.
TEMP
1. Push the TIMER button when the unit is
DOWN
off, only the Auto-start feature can be set.
1
2. Keep pressing the TIMER button, each
TIMER
press will increase the selected time by
1 hour increments, up to 12 hours.
SLEEP
3. The time can be set in a range of 0~12
hours.
4. After the desired time has established,
wait for about 10 seconds until the
setting temperature reverts back in the
display window of the air conditioner.
This indicates the program is set.