Danby DAC6010E Guide D'utilisation Et Soins De Propriètaire page 7

Installation Instructions
LOCATION
All manuals and user guides at all-guides.com
Fig. 2
1) Assembly of the Upper Channel to Cabinet.
• "L" Shaped Top Channel: Install the "L" shaped channel to the top of the
cabinet as shown in Fig. 3, using four (4) 3/8" screws.
2) Assembly of the Side Curtains to Cabinet.
• Extend the shutter from the shutter frame and slide it into the shutter tabs
on the side channel of the air conditioner, as shown in Fig. 4.
• Slide the shutters into the top ("L" Shaped) and bottom ("U" Shaped)
channels. The shutters are identified (on frame) as left and right.
3) Completing the Installation
• Cut the foam (non adhesive) sealing strip to fit the area of the window sill
that the air conditioner will rest on.
Fig. 3
Fig. 4
6
20"
Min
30"
Side
Min
Obstruction
Ground
"U" shaped Channel
(Factory Installed)
Shutter tabs
Shutter
Shutter frame
Awning
12" Min
20"
Min
Fence,
wall, or
other
obstacle
(Factory installed on some units)
3/8" screws
"L" shaped mounting
bracket