DUO, DUO 2V, DUO 2
12.3. Adding sound-insulating material into the cabinet
A component from the sound-insulating material is to be installed in the opening of the cabinet of
the compressor without a dryer.
This component is provided in the basic equipment delivered with the product.
A
C
13. PNEUMATIC CONNECTIONS
13.1. Connecting to the compressed air outlet
The pressure line (2) is attached to the compressed air
outlet (1) on the compressor. Run the hose to the
compressed air manifold or directly to the dental set..
Route the pressure hose through the opening in the rear
wall of the cabinet for cabinet-mounted compressors. (Fig.
8)
11/2021
B
- 27 -
Fig. 6
NP-DUO-13_11-2021-MD