Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
26
SwitchView IP 1020 Installer/User Guide
To align the mouse cursors:
Click the Align Local Cursor button in the Video Viewer window toolbar. The local cursor should
align with the cursor on the remote device.
NOTE: If cursors drift out of alignment, turn off mouse acceleration in the attached device.
To refresh the screen:
Click the Refresh Image button in the Video Viewer window.
-or-
Select View - Refresh from the Video Viewer window menu.
The digitized video image is completely regenerated.
To enable or disable Full Screen mode:
1.
To enable Full Screen mode, click the Maximize button.
-or-
Select View - Full Screen from the Video Viewer window menu.
The desktop window disappears and only the accessed device desktop is visible. The screen
resizes up to a maximum of 1024 x 768. If the desktop has a higher resolution, then a black
background surrounds the full screen image. The floating toolbar appears.
2.
To disable Full Screen mode, click the Full Screen Mode button on the floating toolbar to
return to the desktop window.
To enable automatic, full or manual scaling:
1.
To enable automatic scaling, select View - Scaling from the Video Viewer window menu. The
device image scales automatically.
2.
To enable full scaling, select View - Scaling from the Video Viewer window menu. The device
image scales automatically to the resolution of the server being viewed.
3.
To enable manual scaling:
a.
Select View - Scaling from the Video Viewer window menu.
b.
Choose the dimension to scale the window. Available manual scaling sizes are as follows:
1024 x 768
960 x 720
896 x 672
832 x 624
768 x 576
704 x 528
640 x 480
Publicité
Chapitres
Table des Matières
