Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
20
SwitchView IP 1020 Installer/User Guide
To delete a user account (Administrator only):
1.
On the side menu bar, select Local Accounts. The current user list will be displayed.
2.
Click the box to the left of each account that you wish to delete, then click the Delete button.
To edit a user account (Administrator or active user only):
1.
On the side menu bar, select local accounts. The current user list will be displayed.
2.
Click the name of the user you wish to edit. A user profile will appear.
3.
Edit the user account as needed, then click Save.
Managing Device Properties
Viewing and changing appliance configuration information
The SwitchView IP 1020 remote access device can report most device properties directly through
the SVIP1020 web browser. Table 3.2 lists the available menu options for viewing and changing
appliance configuration information.
NOTE: Users can view all appliance information, but only Administrators can change settings.
Table 3.2: Viewing Appliance Information
To do this:
Display the unit's name or type
Display active interface type and status
Enter, change or display the unit's network
address, gateway address, subnet mask, MAC
address, LAN speed, DHCP enable status or
ICMP ping reply status
Display the unit's current firmware revision for
application, boot and Video FPGA
Display the active KVM session and its duration
View the unit's part number and serial number
Enter or display the unit's Site, Department
and Location
Enable the inactivity timeout
Change the unit encryption level
Change target device keyboard layout
Select this:
Appliance - Overview
Target Device
Appliance - Appliance Settings - Network
Appliance - Appliance Settings - Versions
Appliance - Appliance Settings - Sessions - Active
Appliance - Properties - Identity
Appliance - Properties - Location
Appliance - Appliance Settings - Sessions - KVM settings
Then, click the Enable Inactivity timeout box.
Appliance - Appliance Settings - Sessions - KVM settings
Then, select the level of encryption desired for keyboard/
mouse signals and then video signals.
Appliance - Overview
Publicité
Chapitres
Table des Matières
