Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Updating the SwitchView IP 1020 Remote Access Device with
FLASH Firmware
NOTE: Check http://www.avocent.com for firmware update files. For instructions on how to update your
SwitchView IP 1020 remote access device firmware, see Appendix A on page 37.
To reboot the SwitchView IP 1020 remote access device remotely:
1.
From the side navigation bar, select Appliance - Overview.
2.
When the appliance overview window appears, click Reboot Appliance.
Managing Local Accounts
The SwitchView IP 1020 web server provides local and login security through Administrator-
defined user accounts. By selecting Local Accounts on the side menu bar, Administrators may add
and delete users, define user preemption and access levels and change passwords.
User access levels
Accounts have two access levels: user and Administrator. Most management tasks can only be
performed by persons with Administrator level access.
Preemption levels
The preemption level of users determine whether they may disconnect another user's video (KVM)
session with a target device.
SwitchView IP 1020 web server Administrators may specify the preemption level for user accounts
when an account is created. The preemption level may be changed later.
Preemption levels range from 1-4, with 4 being the highest level. For example, a user with a
preemption level of 4 may preempt other level 4 users, as well as those with a level 1, 2 or 3 setting.
To add a new user account (Administrator only):
1.
On the side menu bar, select Local Accounts. The current user list will be displayed.
2.
Click the Add button.
3.
Enter the name and password of the new user in the blanks provided.
4.
Select the preemption and access levels for the new user.
5.
Click the Save button to complete the process.
Chapter 3: Web Server Operations
19
Publicité
Chapitres
Table des Matières
