Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Getting Started
Before installing your SwitchView IP 1020 remote access device, refer to the following lists to ensure
you have all items that shipped with the SwitchView IP 1020 remote access device as well as other
items necessary for proper installation.
Items supplied with the SwitchView IP 1020 remote access device
•
Power adaptor
•
Power cord
•
Avocent CPS2-6A cable
•
SwitchView IP 1020 Installer/User Guide (this manual)
•
SwitchView IP 1020 Quick Installation Guide
Additional item needed
•
One CAT 5 patch cable for network connectivity (4-pair UTP)
Connecting the SwitchView IP 1020 Remote Access
Device Hardware
To connect and power your SwitchView IP 1020 remote access device:
1.
Power down the target server that will be attached to your SwitchView IP 1020 remote access
device. Locate the power adaptor and cord that came with your SwitchView IP 1020 device.
Plug the barrel connector into the back panel of the SwitchView IP 1020 device, the AC power
cord into the adaptor block and the AC connector into an appropriate AC wall outlet.
WARNING: The power cord is considered the main disconnect device.
2.
To connect a local user, plug a VGA monitor into the port labeled LOCAL VIDEO on the back
panel of the remote access device. Plug the PS/2 keyboard and mouse cables into the
appropriately labeled ports located on the front of the remote access device.
3.
To connect to the server, plug one end of the CPS2-6A cable into the server's VGA, keyboard
and mouse ports. Plug the other end into the SERVER VGA, keyboard and mouse ports on the
back panel of the SwitchView IP 1020 remote access device.
NOTE: If using USB keyboard and mouse peripherals, plug one end of a USB cable into the server and the other
end into the optional USB port on the SwitchView IP 1020 device. Disconnect the PS/2 connectors of the
CPS2-6A cable from the server, if applicable.
4.
Plug a CAT 5 patch cable from your Ethernet network into the LAN port on the back of the
SwitchView IP 1020 remote access device.
Chapter 2: Installation
5
Publicité
Chapitres
Table des Matières
