Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
22
SwitchView IP 1020 Installer/User Guide
Launching a KVM Session
NOTE: When using a non-proxied connection, video performance over a slower network connection may be less
than optimal. Since certain color settings (such as Grayscale) use less network bandwidth than others (such as
Best Color), changing the color settings can increase video performance. For optimal video performance over a
slower network connection, Avocent recommends a color setting such as Grayscale/Best Compression or Low
Color/High Compression. See the Adjusting color depth section on page 27 for more information.
To launch a KVM session from the SVIP1020 Explorer window:
From the Target Device screen, click the KVM Session link to open the Video Viewer in a
new window.
Session time-out
A remote session can time-out if no activity has occurred in a Session window for a specified time.
The session time-out value can be configured by using the Appliance KVM Session Settings
window. If you specify a new time-out value, it will be used the next time the SwitchView IP 1020
web server is accessed.
To enable, disable or configure the session time-out:
1.
In the side menu, select Unit View - Appliance - Appliance Settings - Session - KVM Settings.
2.
Select the desired setting for the Enable Activity Timeout box.
3.
If necessary, select the time limit for the Inactivity timeout.
Publicité
Chapitres
Table des Matières
