Launching A Kvm Session - Avocent SwitchView IP 1020 Guide D'installation Et D'utilisation

18
SwitchView IP 1020 Installer/User Guide
If you click BOOKMARK or the bookmark icon after the SwitchView IP 1020 web server session
has timed out, the User Login window will open and you must log in again.
To bookmark a window:
1. In the top option bar, click BOOKMARK or the bookmark icon. The Add Favorite dialog box
will appear.
2. If you wish, type a name for the window. You may also click the Create in button to create or
specify a folder in which to place the window.
3. Click OK to close the Add Favorite dialog box.
Printing a window
Each SwitchView IP 1020 web server session window has a print icon in the top option bar that
enables you to print that screen.
To print a SwitchView IP 1020 web server window:
1. In the top option bar, click PRINT or the print icon. The Print dialog box will appear.
2. Specify the options you wish to use for printing the SwitchView IP 1020 web server window.
3. Click Print to print the SwitchView IP 1020 web server window and close the Print dialog box.
Refreshing a window
An SVIP1020 Explorer window may be refreshed at any time by clicking REFRESH or the refresh
icon in the top option bar.
Logging Out
A user may log out at any time by clicking the logout icon in the top option bar.

Launching a KVM session

To launch a KVM session from the SVIP1020 Explorer window:
1. From the SVIP1020 Explorer window, select Target Device in the side navigation bar.
2. Click the KVM session link to the right of the target device. The Video Viewer will launch. For
more information on the Video Viewer, see Chapter 4.
To disconnect an active KVM session (Administrator only):
1. Click Appliance - Appliance Settings - Session - Active to display the active KVM session.
2. Select the checkbox to the left of the active KVM session and click the Disconnect button.