Ozone SPARK Manuel page 16

Packing
To prolong the life of your wing and to keep the plastic reinforce-
ments in the best possible condition it is very important to pack
the wing carefully.
Ozone strongly recommends to use the concertina packing method
exactly as shown so that all of the cells rest alongside each other
and the plastic reinforcements are not unnecessarily bent. Using
the Ozone Saucisse pack will help preserve the life of the wing and
aid with the speed and ease of packing.
Step 1. Lay mushroomed
wing on the ground. It
is best to start from the
mushroomed position as
this reduces the dragging of
the leading edge across the
ground.
Step 2. Group LE reinforce-
ments with the A tabs
aligned, make sure the plas-
tic reinforcements lay side
by side.
Step 3. Lay wing on its side
and Strap LE...Note the
glider is NOT folded in half; it is
folded with a complete concer-
tina from tip to tip. It is really
important to not stress the
middle cell or bend the plastic
too tightly.
Step 4. Group together the
centre of the wing.
Step 5. Carefully zip up the
saucisse pack without trap-
ping any material or lines.
Step 6. Make the first fold after the LE reinforcements. Do not
fold the plastic reinforcements, use 3 folds around the LE.
14