Ldap Search Parameters; Figure 3.3: Ldap Overview Page In The Obwi - Avocent SwitchView IP 1020 Mode D'emploi

Figure 3.3: LDAP Overview Page in the OBWI

To configure LDAP server parameters:
1. Select Appliance - Appliance Settings - User Accounts - LDAP Accounts - Overview.
2. Identify the primary and secondary server address, port and access type in the appropriate
fields or radio buttons.
3. Click Save.

LDAP Search parameters

On the LDAP Search page, you can configure the parameters used when searching for LDAP
directory service users.
Use the Search DN field to define an administrator-level user that the appliance uses to log into the
directory service. Once the appliance is authenticated, the directory service grants it access to the
directory to perform the user authentication queries specified on the Query page. The default values
are cn=Administrator, cn=Users, dc=yourDomainName and dc=com and may be modified. For
Chapter 3: Web Interface Operations 17