Logging Into The Switchview Ip 1020 Remote Access Device - Avocent SwitchView IP 1020 Mode D'emploi

10 SwitchView IP 1020 Remote Access Device Installer/User Guide
Avocent recommends that the browser be kept up-to-date with the latest version.
A Video Viewer window allows you to control the keyboard, monitor and mouse functions of
individual target devices connected to the SwitchView IP 1020 remote access device in real time.
You may also use predefined global macros to perform actions within the Video Viewer window.
For instructions on how to use the Video Viewer, see Chapter 4. Once the switch has been installed
and configured as described in Chapter 2 and you have set the IP address, you are ready to begin
regular operation.

Logging into the SwitchView IP 1020 remote access device

NOTE: The SwitchView IP 1020 remote access device boots to the following static IP address, gateway and
netmask:
IP address: 192.168.1.254
Gateway: 192.168.1.1
Netmask: 255.255.255.0
Before you can begin a KVM session, you must first login to the SwitchView IP 1020 remote
access device on-board web interface.
To log into the SwitchView IP 1020 remote access device on-board web interface:
1. Launch a web browser.
2. In the address field of the browser, enter the IP address or host name assigned to the
SwitchView IP 1020 remote access device you wish to access. Use https://xxx.xx.xx.xx or
https://hostname as the format.
3. When the browser makes contact with the switch, enter your username and password, then
click Login. The SwitchView IP 1020 Explorer Window will appear.