Reverse Door Swing; Tools Required - GE GPV10 Serie Manuel Du Propriétaire Et Instructions D'installation

Installation Instructions

Reverse Door Swing

WARNING
follow these instructions, leaving off parts, or overtightening screws, can lead
to the door falling off and result in injury and property damage.
Left/Right Door Opening Method
This product allows you to reverse the door opening from left to right and back. You
can select your preference of door opening by following the procedure to make the
change.

Tools Required

Dismantling
doors in place.
2. Remove the upper hinge cover by using flat head screwdriver.
head. Take out hinge by pulling it vertically and keep it in safe
place. Remove the top hinge plug from the opposite side of the
cabinet top.
the door and carefully put it aside.
4. Remove two screws of middle hinge using ratchet wrench with
8 mm socket, and keep them in a safe place.
refrigerator door, and carefully put it aside.
doors.
with screws provided.
49-1000399 Rev. 1
Follow all steps when reversing the door swing. Failure to
9