Control Panel - Thermador T18BD Serie Guide D'utilisation Et D'entretien

Control panel

To utilize all the functions of your appliance, we recommend that you familiarize yourself thoroughly with the control panel and the
setting options.
A POWER button
Switches the appliance on and
off.
B ICE button
Switches the ice maker on and
off. See also the section on "Ice
and water dispenser".
C ALARM OFF button
Switches off a warning signal.
See section on "Warning
messages via the display".
D SUPER button
Switches the Super function on
and off. See section on "Super
function".
E Display
The set required temperature of
the appliance is indicated on the
display. Activated special
functions are indicated via
symbols, e.g. Super function –
.
SUPER
In Setup mode the menus as well
as the setting options are
indicated on the display.
See section on "Setup mode".
10
< >
F buttons
Select the menus in setup mode.
See section on "Setup mode".
The required temperature
adjustment is activated with the
< >
buttons.
See section on "Setting the
temperature".
G + – buttons
Select the available parameters
of the menu.
See section on "Setup mode".
The displayed temperature of the
appliance is also changed with
the + – buttons.
See section on "Setting the
temperature".
H SETUP button
This button activates and also
ends Setup mode. When Setup
mode is ended with the SETUP
button, the changed settings are
saved.
I VACATION button
Switches Vacation mode on and
off. See section on "Vacation
mode".
Each button depression is
acknowledged by a signal if the
setting is activated in Setup mode,
Sound menu (TONE).
Symbols at Display
Super function is
activated,
see page 11.
The Vacation mode is
activated,
see page 13.
For the setting
options in the Setup
mode, see page 12.
A warning message
is displayed,
see page 18.
The ice maker is
switched on,
see page 14.
ON