Use Of Rinse Aid - Zanussi ZDT110 Notice D'utilisation

1
3
Fill the salt container with
1 litre of water (only the
first operation).

Use of rinse aid

Caution! Only use branded rinse aid for
dishwashers.
Do these steps to fill the rinse aid dispenser:
1
22
2
4
2
5
It is normal that water overflows from the salt con-
tainer when you fill it with salt.
Make sure that there is no grain of salt outer of the
salt compartment. Salt which stays on the tank for
a while drills the tank. It is recommended to start a wash-
ing programme immediately after you fill the salt con-
tainer. This prevents of corrosion because of spilled salt.
Important! Fill the salt container from time to time.
The salt cap has a refill indicator window in the center. A
green float is easy to see when there is a salt inside the
container. It almost goes out of view when the salt is gone.
3
6
4