Philips Cineos 42PF9830A/37 Mode D'emploi page 9

2496.1 16x24 en 14-12-2005 10:11 Pagina 5
- Cable box with A/V outputs
CABLE
CABLE / ANTENNA
1
2
SIGNAL
SPLITTER
• Connect the incoming cable TV signal 1 to a signal splitter (not
supplied).The signal splitter enables you to avoid having to use the
TO TV jack on the back of the cable box.This jack will not supply
stereo sound to the TV.
Note:Your cable box may have a different label for the
as or .
OUTPUT OUT
• Connect a coaxial cable (not supplied) to a connector on the signal
splitter and to the
CABLE/ANTENNA 75 Ω
• Connect another coaxial cable (not supplied) to a connector on the
signal splitter and to the cable
box.
• Connect A/V cables (not supplied) to the
outputs on the back of the cable box and to the
R
(labeled ) and
VIDEO
back of the TV.
• To view programs from your cable box, first press the
on the remote control.
• Press the cursor down or up buttons until the
selected.
• Press the button to confirm your selection.The
OK
source becomes current for the viewing of cable TV programs
through your cable box.
Note: If your cable box Audio/Video outputs will not supply video and
stereo audio to the TV, you will need to make the connection shown above
in the example "Cable box with
- Cable box with S-Video, component video (YPbPr) or HDMI
connectors
See Connect Accessory Devices, p. 56-58.
Watching Cable TV programs that don't require the cable box
Since you've connected the cable TV signal directly to the TV's tuner, you
can also watch the unscrambled programs by simply tuning to the
desired channel.You must first use Autoprogram, however, to store
channels in the TV's memory. See page 14.
Note: This connection will supply stereo sound to the TV if it is being broadcast
by the station you are watching.
H Pr L
V Pb R
VIDEO Y
DIGITAL
AUDIO
IN
AV1
AV3
S-VIDEO
VIDEO Pr
L
Pb
S-VIDEO
AV2
R
Y
4
MONITOR OUT
DIGITAL
AUDIO
L R VIDEO G-LINK
OUT
75
AV2 :
L + R + VIDEO
3
IN OUT
STB
x jack 2 on the TV.
jack 3 on the back of the cable
IN
VIDEO
) jacks 4 on the
(labeled and
AUDIO L R
".
RF IN/OUT
jack, such
TO TV
and and
AUDIO L
video
AV2
button
AV+
signal source is
AV2
input
AV2
5