Philips Cineos 42PF9830A/37 Mode D'emploi page 61

2496.1 16x24 en 14-12-2005
Devices with an S-Video connector
S-VIDEO
S-VIDEO
AV1/AV2 :
AV2
S-VIDEO
1
DVD / STB
Notes
- If necessary, you can adjust the picture position to the center of the screen with the cursor keys.
- The labels for the component video sockets may differ depending on the DVD player or the device connected.
Although the abbreviations may vary, the letters B and R stand for the blue and red component signals,
respectively, and Y indicates the luminance signal. Refer to the DVD player's or devices instructions for use for
definitions and connection details.
- This television is designed to accept high definition signal standards 480p, 720p and 1080i as specified by the
Electronic Industries Association standard EIA770.3.
Digital devices from different manufacturers have the possibility of differing output standards which may cause
difficulties for the television to properly display.
- Due to possible digital image distortion when displaying signals from connected digital equipment, automatically
the Auto picture setting
picture, p. 26.
Changing this setting during reviewing will not be stored as
: in case you notice scrolling images, wrong colors or no color, no picture, or even combinations of these
Warning
on your screen, check if the connections are done in the correct way or move your digital device further away
from your TV.
10:11 Pagina 57
L
H Pr
AV1
R
V Pb
VIDEO Y
DIGITAL
AUDIO
IN
AV1
AV3
Pr
VIDEO
L
Pb
AV1/AV2 :
R
Y
L + R
AV2
2
Soft is selected, if you selected Digital STB in the Source menu. See Picture menu, Auto
&
Connect an S-Video cable to the
input 1.
VIDEO
Note: When using the
S-VIDEO
connect any device to the
are using.
é
Connect the audio cables to the device's
and jacks and to the
L R
jacks 2 on the TV accordingly to where
AV2
you connected the S-Video cable.
setting after switch off.
Personal
or
AV1 AV2 S-
connector do not
input that you
AV VIDEO
AUDIO
and audio or
L R AV1
57