First Time Installation; To Operate The Motorized Swivel - Philips Cineos 42PF9830A/37 Mode D'emploi

2496.1 16x24 en 14-12-2005

First time installation

The first time (and only the first time) you turn on your set you see an installation introduction screen. The
Installation procedure consists of a series of screens that guide you through the process.
& After an introduction screen, you are asked to select a language of the TV's on-screen-menus. (The text of
the header and the info on screen continuously change language.)
é
Press the cursor up/down to highlight your language.
" Press the button.
OK
'
Follow the on-screen instructions to proceed.
Note: Once you completed the initial installation procedure you can access the screens from the Settings menu.
See p. 12.

To operate the motorized swivel

POWER
DVD/R CBL TV VCR AUX
A/CH SELECT
DEMO CLOCK
MY CONTENT
®
OK
®
®
MENU
+
VOL
MUTE
-
_-
ABC
1 2
10:11 Pagina 7
The motorized swivel can turn + and - 30 degrees and can be operated
with the remote control of your TV. Manual rotation remains possible
too.
Preparation
&
Insert the DC cable of the swivel transformer into the
swivel.
TV GUIDE
é
Insert the power cord to the swivel transformer.
" Insert the mains plug of the swivel transformer in the wall socket.
Operation
INFO
First press the
keep it pressed.
Then simultaneously:
- press the cursor left/right to rotate the swivel in the direction of the
®
command;
- press the the cursor down to bring the swivel in a central position;
- press the cursor up to return the swivel to the last selected position.
PIP
Note: After a power drop or a power cord plug out, adjust the swivel position
with the cursor left/right.
+
CH/
Automatic positioning to central position
PAGE
-
Press the
POWER
and to turn the swivel to its central position.
DEF
3
(only with 42PF9830A sets)
button at the side of your remote control and
SWIVEL
button for at least 5 seconds to turn off your TV
input of the
DC
7