Philips Cineos 42PF9830A/37 Mode D'emploi page 76

2496.1 16x24 en 14-12-2005
Automatic software upgrade procedure
:
Warning
• You are not allowed to remove the USB portable memory during the software upgrade procedure!
• In case of a power drop during the upgrade procedure, don't remove the USB portable memory from the TV.
The TV will continue the upgrade as soon as the power comes back.
• If you try to upgrade to a software version lower than the current version, a confirmation will be asked.
Downgrading to older software should only be done in case of real necessity.
• If an error occurs during the upgrade you should retry the procedure or contact your dealer.
(
When the software upgrade was successful, remove the USB portable memory and restart your TV
with the
POWER
Your TV will start up with the new software.
Note: Once the upgrade is finished use your PC to remove the TV software from your USB portable memory.
Manual software upgrade procedure
For a manual software upgrade copy the "autorun.upg" file in a directory called "Upgrades" located in
the root of the USB portable memory.
Settings
Installation
Language
Autoprogram
Weak channel installation
TV Guide On Screen
Software upgrade
Info
' When the software upgrade was successful, remove the USB portable memory and restart your TV
with the
POWER
72
10:11 Pagina 72
button on your remote control.
Software upgrade
Current software info
Local upgrades/applicat.
button on your remote control.Your TV will start up with the new software.
&
Power off your TV and remove all memory
devices.
é
Insert the USB portable memory that contains
the downloaded software upgrade.
" Switch on your TV with the
on your remote control.
' At startup the TV will scan the USB portable
memory until it finds the update content.The
TV will automatically go to the upgrade mode.
After a few seconds it will display the status of
the upgrade procedure.
&
Insert the portable memory that contains the
downloaded software upgrade.
é
Select Software Upgrade
menu. Go to Local upgrades/applications
The TV will list all compatible images available
on the USB portable memory and display the
data for each selected upgrade image.
"
Select the correct upgrade image and press the
red color button to start the upgrade.
Your TV will restart and will automatically go
to the upgrade mode. After a few seconds it
will display the status of the upgrade
procedure.
Warning : If you try to upgrade to a software
version equal or lower than the current version, a
confirmation will be asked. Downgrading to older
software should only be done in case of real
necessity.
button
POWER
in the Installation
.