Start-Up, Operation And Adjustment - Enofrigo DOGE ISOLA Notice D'instruction

See enclosure "A" for "DROP IN"model installation instructions.

12. START-UP, OPERATION AND ADJUSTMENT

To obtain the best performance from the refrigeration unit, the following conditions must obtain:
• Ambient temperature = 25°C
• Relative humidity R.H. = 60%
Before starting the machine, follow the instructions below:
1) Check that the system and the electrical connections comply with the current local regulations.
2) Check that the machine voltage specified in the identification plate corresponds to the line voltage at the
socket. If not, suspend electrical connection and call the manufacturer or authorised dealer.
3) Check correct earthing of the machine and availability of a mains bipolar switch with differential.
4) If the power supply socket and plug are not of the same type, have the socket replaced by a qualified
technician. Do not use extensions or multiple adapters. The power supply cable and plug must be easily
accessible after installation. If they show signs of wear or damage, they must be immediately replaced by a
qualified technician.
5) Ensure that the control panel and the glass light bulb screen are properly secured.
6) For the models provided with wheels, ensure that two of them are locked by the stops provided.
For the models provided with accessories, fit all the accessories as shown in the following figures
7)
1. food dish supports
2. stainless steel food dishes
3. stainless steel raised trays
3
To ensure optimum conservation, do not fill the food dishes right to the top leave at least 3 cm free at the
top of the dish.
25
2
1
CT68900001_
Rev.00 07/13
: