Users Settings „Personal - RIHO Olivia Mode D'emploi

After you have chosen a user profile the system will automatically start. When for example your hydro must be activated in
your settings, the hydro button will also be active in the normal settings. To turn off the chosen user profile you can hold the
user button on the home screen. When a user profile is active it is still possible to turn on functions in the normal settings.
There are 6 user profiles you can program (see "user settings personal"). To change the settings of a user profile hold the
user profile button. You will now go to the user setting menu.
4.2.2 User settings "personal"
By holding this button the user settings menu appears.
Set user preferences:
When you program a user then only the functions that are part of your system will be programmable. For
example, if you have no colour therapy, then this will not be displayed on the screen. The system allows
you to program 3 users. For each user, the following maximum functions are possible.
Aero (floor systeem)
Hydro
Backjets of the hydrosystem
Feetjets of the hydrosystem
Puls duration Hydro + floorsystem together
Heater
From the moment you enter the settings menu the system will be activated. With the arrow keys you can scroll up and down
through the different options. When you have selected a function you can turn it on or off and some functions have broader
adjustment possibilities. After setting your presets you go to the save function to save the presets in the memory and return.
On the other page the possibilities with the different settings are explained.
IW00290.1
White light
Colour therapy
Back
Save current user settings
Reset user to factory settings
OK
OK
-18-